









                               _______
                              /      /
                             /      /
                            /      /
                           /      /
                          /      /
                         /      /
                        /      /
                        \     /
                         \   /
                          \ /\\\\\\\\\\ ////////////
                           -------------------------
                            \      DiskBase       /
                             \-------------------/









                                      by


                                  IntelliSys
                             Post Office Box 21233
                               Roanoke, VA 24018
                            (703) 345-5906 [voice]
                             (703) 345-9423 [FAX]
                          73677,2475 [Compuserve ID]


                      Copyright (c) IntelliSys 1991-1993
                             All Rights Reserved.




         DiskBase                                              Page i


                               Table of Contents

         INTRODUCTION.............................................. 1
         ABOUT INTELLISYS.......................................... 1
         SOFTWARE LICENSE AGREEMENT................................ 2
              License.............................................. 2
              Limited Warranty and Limitation of Remedies.......... 3
              General.............................................. 4
         INSTALLATION.............................................. 4
         COMMAND LINE OPTIONS...................................... 6
         USING DISKBASE............................................ 6
              MAIN MENU............................................ 6
              CATALOG KEYBOARD ASSIGNMENTS......................... 9
              UPDATING MULTIPLE DISK ARCHIVES..................... 10
         PROGRAM CONFIGURATION.................................... 11
         SCREEN INDICATORS........................................ 13
         WHICH ARCHIVE PROGRAM TO USE............................. 14
         HINTS.................................................... 14
         NETWORK ACCESS........................................... 15
         DEFINITIONS.............................................. 15
         REGISTRATION............................................. 15
         SITE-LICENSES............................................ 16
         DISTRIBUTING DiskBase.................................... 16
         ACKNOWLEDGMENTS.......................................... 16




         DiskBase                                              Page 1


                                 INTRODUCTION


         This file provides on-line help for DiskBase as well as
         being the complete documentation.

         The purpose of DiskBase is to allow you to store and
         retrieve programs or data on whatever DOS recognizable
         storage device you have in the most simple and efficient
         manner possible.  Many computer users will never have
         enough disk space to store all the files they need at the
         same time.  This program makes it possible for you to store
         files used less often on floppy disks and to easily
         retrieve them.  Also, many computer users have one drive
         that is much faster than the others (a ram drive which is
         faster than a hard drive or a hard drive which is faster
         than a floppy drive).  This program allows you to store
         files on the slower drive, while the faster drive is used
         for running programs.  This gives you the fastest possible
         program execution speed.

         DiskBase is currently distributed as Shareware.  It is not
         free.  Shareware is software that you can examine on a
         trial basis.  If you decide to use DiskBase beyond the
         trial period, you are required to register as a user and
         send IntelliSys the registration fee.  (See below for
         information about how to register your copy.) You are
         encouraged to pass a copy of DiskBase along to your friends
         for evaluation.  Please encourage them to register their
         copy as well if they find it useful.

         Just like commercial authors, shareware authors are
         accomplished programmers, and they write programs that are
         of comparable quality.  Distributing software as shareware
         saves money for the software developer by allowing
         distribution through low-cost channels, while presenting
         you with a quality product at a savings.  The Shareware
         concept can only work for the benefit of all computer users
         if the users of Shareware pay for its use.  Please refer to
         the LICENSE AGREEMENT for terms for use of DiskBase.


                               ABOUT INTELLISYS


         IntelliSys creates custom software and provides consulting
         services, as well as developing Shareware applications.  We
         are extremely interested in what our customers think about
         our products and how they feel they can be improved.

         Also, if you would like a modified version of this program
         to meet your specific needs, or if you need an entirely


         DiskBase                                              Page 2


         different kind of program, please do not hesitate to
         contact us to discuss it.


                          SOFTWARE LICENSE AGREEMENT


         READ THIS LICENSE AGREEMENT BEFORE USING DiskBase.  THIS
         AGREEMENT IS A LEGAL CONTRACT BETWEEN YOU, THE USER OF
         DiskBase, AND INTELLISYS GOVERNING YOUR USE OF DiskBase.
         THIS AGREEMENT CONSTITUTES THE ENTIRE AGREEMENT BETWEEN YOU
         AND INTELLISYS WITH RESPECT TO THE USE OF DiskBase.  USING
         DiskBase INDICATES YOUR ACCEPTANCE OF THIS AGREEMENT.  THIS
         AGREEMENT SHALL ALSO BE BINDING ON ANY SUBSEQUENT,
         AUTHORIZED LICENSEE.  IF YOU DO NOT WISH TO AGREE TO THE
         TERMS OF THIS AGREEMENT, DO NOT USE DiskBase.


         License


         IntelliSys grants you a non-exclusive license to use the
         DiskBase software program and documentation as specified in
         this Agreement.  You may use DiskBase for a reasonable
         period of time while you decide whether to become a
         registered user of DiskBase.  After using DiskBase for a
         reasonable period of time, you may not use DiskBase without
         becoming a registered user.

         As a registered user, you may use DiskBase on a single
         computer or terminal at a time.  In addition, you may make
         one backup copy of DiskBase.

         This Agreement specifically does not grant to you or anyone
         any rights to patents, copyrights, trade secrets, and
         trademarks.  You acknowledge and agree that DiskBase is
         owned by IntelliSys and is protected by United States
         copyright law and international treaty provisions.  You
         agree to safeguard DiskBase as copyrighted material.  You
         acknowledge that the structure and organization of DiskBase
         are the valuable trade secrets of IntelliSys.  You agree to
         hold such trade secrets in confidence.

         You may not distribute DiskBase for any kind of
         remuneration without prior authorization from IntelliSys.
         You may not distribute DiskBase as part of any other
         software or hardware package.  However, IntelliSys
         encourages you to distribute copies of DiskBase, without
         charging for the copies, so that others may decide whether
         to become registered users.  In addition, as a registered
         user, you may transfer your rights under this Agreement on
         a permanent basis provided you transfer your registered


         DiskBase                                              Page 3


         copy of DiskBase and any backup copy and provided the
         recipient agrees to the terms of this Agreement.  Such a
         permanent transfer ends your license to use DiskBase.  You
         may not transfer obsolete versions of DiskBase.  Other than
         as provided in this paragraph, you may not loan,
         sublicense, rent, lease, sublease, or otherwise transfer
         any right to use DiskBase.

         You may not make copies of DiskBase, or any portion of it,
         except as expressly provided in this Agreement.  You may
         not reproduce, transmit, transcribe, store in a retrieval
         system, or translate into any language DiskBase or any part
         of it.  You may not disassemble, decompile, reverse
         engineer, or create derivative works based on DiskBase or
         any portion of it.


         Limited Warranty and Limitation of Remedies


         IntelliSys warrants that the diskette containing a
         registered copy of DiskBase and the accompanying
         documentation shall be free from defects in materials and
         workmanship under normal use for a period of thirty days
         from the date the diskette is sent to you.  To exercise
         your rights under this warranty, you must return the
         defective product to IntelliSys at your expense within the
         warranty period.  IntelliSys will then replace the product
         or return your purchase price, at its option.  IntelliSys's
         entire liability and your exclusive remedy and sole measure
         of recoverable damages under this Agreement shall be, at
         IntelliSys's option, (1) return of the purchase price paid,
         or (2) replacement of the defective product.  In the event
         of replacement of a diskette, IntelliSys shall warrant the
         replacement for the remainder of the original thirty days
         or for fourteen days, whichever is longer.

         DiskBase IS PROVIDED "AS IS" EXCEPT AS EXPRESSLY SET FORTH
         IN THE PRECEDING PARAGRAPH.  THE WARRANTY IN THE PRECEDING
         PARAGRAPH IS THE ONLY WARRANTY OF ANY KIND, EITHER EXPRESS
         OR IMPLIED, CONCERNING DiskBase, INCLUDING, BUT NOT LIMITED
         TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
         FOR A PARTICULAR PURPOSE.  NEITHER INTELLISYS NOR ANYONE
         WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR
         DELIVERY OF DiskBase SHALL BE LIABLE TO ANYONE FOR ANY LOST
         PROFITS OR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL,
         EXEMPLARY, OR SPECIAL DAMAGES OR COSTS (INCLUDING LEGAL
         EXPENSES OR LOSS OF GOODWILL) ARISING OUT OF USE OF, OR THE
         INABILITY TO USE, DiskBase EVEN IF INTELLISYS HAS BEEN
         ADVISED OF THE POSSIBILITY OF SUCH LOST PROFITS, DAMAGES,
         OR COSTS.
         


         DiskBase                                              Page 4


         General


         If any provision of this Agreement shall be unlawful, void,
         or for any reason unenforceable, then that provision shall
         be deemed severable from this Agreement and shall not
         affect the validity and enforceability of the remaining
         provisions of this Agreement.  This Agreement shall be
         governed by the laws of the Commonwealth of Virginia.  Any
         civil action or other proceeding that may be brought
         concerning DiskBase or this Agreement shall be brought only
         in a state or federal court of competent jurisdiction
         located within the city of Roanoke, Virginia.  If any civil
         action or other proceeding is brought in any other forum,
         ones bringing the action or joining the action shall be
         liable, jointly and severally, to IntelliSys, its
         employees, and agents for any costs whatever associated
         with defending the action or other proceeding, including
         attorney fees and consequential costs such as travel
         expenses and lost wages.

         IntelliSys reserves the right, at it's sole discretion, to
         change, modify, or update DiskBase at any time without
         notifying anyone.  IntelliSys reserves the right to offer
         updates to DiskBase either free of charge or for an
         additional charge.

         Trademarks of all products mentioned herein are property of
         their respective owners.


                                 INSTALLATION


         1)      Be sure your archive program (PKZIP, or ARJ, etc.)
                 is in your PATH.  (Refer to your DOS manual for
                 more information about your PATH.)

         2)      Create a directory for DiskBase and copy all of its
                 files to it.  (OPTIONAL:  Add this directory to
                 your PATH.  DiskBase will find all of its files in
                 this directory if it is in your path statement.)


         DiskBase                                              Page 5


         3)      OPTIONAL: Create an ASCII text file called GO.CFG
                 in each directory that you want to be able to
                 archive that contains the following lines:

                         NAME =
                         DESCR =
                         SPACE =

                 GO.CFG is optional as are each of the configuration
                 entries in it.  After "NAME =" put a brief menu
                 label.  After "DESCR =" put a description of the
                 directory.  And after "SPACE =" put a numerical
                 estimate of the minimal amount of disk space needed
                 by this application, or needed to restore this
                 directory and all the directories below it.  The
                 estimate of space is used later by DiskBase to
                 determine if enough disk space is available to
                 restore the directory.  DiskBase will accurately
                 determine the total size of all the files used by
                 your directory, but this gives option you a way to
                 specify additional disk space required by your
                 program.

                 If you are using our companion program MENU, and
                 this is a directory for a program, create a file
                 called GO.BAT that starts your program.

         4)      Start DiskBase, by entering

                         DiskBase

                 at the DOS prompt.

         5)      You are now ready to archive a directory to your
                 storage disk (which is defaults to drive A).
                 Choose the "Archive" main menu item and select the
                 directory you wish to archive.  By selecting a
                 directory (pressing Enter on the directory you
                 want to archive), all files in that directory and
                 all directories below it are compressed into a
                 single archive file.  "Archive" will move the
                 directory you choose onto your archive (floppy)
                 drive and remove it from your application/data
                 (hard) drive.  You have just created your first
                 archive!


         DiskBase                                              Page 6


         6)      Once you have created an archive on your storage
                 drive, you can select the CATALOG option from the
                 main menu to view a tabular list of your stored
                 archives.  While viewing the list, you can
                 re-install the archive (INS), view the archive
                 (Alt-V), remove old archives from your collection
                 (DEL), or print a report on your database (Alt-P).

         That's all there is to it!  Now store your collection of
         disks in a safe place - away from strong magnetic sources,
         and wild animals.  Use only high quality disks for
         important archives or for long-term storage.


                             COMMAND LINE OPTIONS


         DISKBASE followed by:

                 /?      displays these command line options,

                 /M      forces use of monochrome colors, and

                 /V      displays verbose messages where appropriate
                         in the program.


                                USING DISKBASE


         MAIN MENU


         The main menu of the program presents you with the
         following options:

                 CATALOG

                         This option allows you to view a listing of
                         your stored archives in tabular format.
                         You are able, when viewing the Catalog (or
                         database), to 1) re-install an archive onto
                         the application/data drive, 2) remove an
                         archive from your collection of disks, 3)
                         view the contents of the archive, and 4)
                         print a report on your database.

                         Eventually you will have duplicates of your
                         archives as you install and remove them
                         from the application/data drive.  This is
                         good.  The best protection we have in the
                         computer world against disaster is


         DiskBase                                              Page 7


                         redundancy.  Having a backup copy of your
                         data WILL be useful.  Having too many old
                         copies just takes up space.  The number of
                         old copies you want to keep is a relative
                         decision and up to you.  From time to time,
                         just remove the oldest duplicates from your
                         collection of disks by moving to the
                         archive in the database and pressing the
                         DEL key.

                 ARCHIVE

                         This option allows you to view all the
                         directories on the data/application drive
                         and select one that needs to be archived
                         and moved to your collection of disks.
                         (The first time the program is run, a
                         catalog will be created to hold your list
                         of archives.) To be precise, the ARCHIVE
                         option will execute your archive program to
                         create an archive on your storage disk, add
                         information about the disk to the database,
                         and remove the old directory and its
                         subdirectories from the application/data
                         drive.  (Note that if there are any files
                         marked with the read-only attribute in the
                         archive directory or below, the archive
                         directory will not be removed and the
                         marked files will remain.) An archive is
                         created based on the first eight (8)
                         characters of the directory name.

                         The archive program may be configured to
                         create a multiple disk archive, i.e. one
                         that spans more than one disk.  If you are
                         NOT creating a multiple disk archive, the
                         archive is created on a disk in your
                         collection that has just enough free space,
                         or on a new disk if no disk in your
                         collection has enough free space.  New
                         disks are automatically labelled to the
                         next available number from your collection,
                         and gaps in disk numbers are filled in.

                         If you ARE creating a multiple disk
                         archive, use only freshly formatted blank
                         disks - not disks from your collection.
                         (The archive program may overwrite the
                         volume label and cause DiskBase to loose
                         track of the disk's contents.) New disks
                         are labelled using only the next higher
                         number from your collection.


         DiskBase                                              Page 8


                         When new disks are added to your
                         collection, DiskBase will ask you to write
                         the disk label on the outside of a new
                         diskette and it will label the diskette
                         using your DATABASE NAME + ORDINAL NUMBER.

                 UPDATE

                         Should you ever have to modify a disk in
                         your collection outside of this program,
                         this option allows DiskBase to update its
                         database with information about that disk.
                         You should never really have to use this
                         option.  If a disk in your collection is
                         changed outside of this program (- you add
                         or remove files from a collection disk),
                         DiskBase needs to be informed of the
                         change.  So, if you are not familiar with
                         archiving software, you should always let
                         this program create the archives.  Archives
                         are created in such a manner that allows
                         for subdirectories to be restored from the
                         root directory.  This program creates
                         archives and moves them off onto disk and
                         updates the catalog without your
                         intervention.  If you happen to have
                         archives that are created in the proper
                         format (- they will recreate subdirectories
                         starting with one named the same as the
                         archive), the update option will add those
                         disks to the database.  However, in this
                         scenario, information contained in
                         configuration files (GO.CFG) in each of the
                         archived directories is not available to
                         this program.  Specifically, the database
                         contains information about how much space
                         is needed to restore the application/data
                         directory, and a one line description of
                         the directory.

                         Please see the section "UPDATING MULTIPLE
                         DISK ARCHIVES" below for more information
                         about updating when you are using an
                         archive program that can span multiple
                         disks.


         DiskBase                                              Page 9


                 REMOVE

                         This option allows you to remove all
                         references in your database to a disk that
                         no longer exists.  If you loose a disk,
                         choose this option to clean up the
                         database.


         CATALOG KEYBOARD ASSIGNMENTS


                 F1

                         Displays help.

                 DEL

                         Remove archive from highlighted diskette.
                         This removes an archive from your
                         collection by deleting it.  The archive
                         should either 1) already be installed on
                         the application/data drive, 2) be a
                         duplicate archive, or 3) be an application
                         or data you no longer need.

                 INS

                         Install highlighted archive.  DiskBase
                         will ask you what drive you want to
                         install the archive on, and the type of
                         archive this is.  Choose the archive
                         method that was used to create the
                         archive originally.

                         If the highlighted archive is a multiple
                         disk archive, be sure the highlight is on
                         the first (oldest) archive file that was
                         created.

                 Alt-P

                         Report on Catalog using .FRM file.  Reports
                         can be generated to the screen, printer, or
                         to a file.

                 Alt-S

                         Search for something by forming a query.


         DiskBase                                              Page 10


                 Alt-A

                         Repeat last search.

                 Alt-V

                         View archive.  Calls VIEW.BAT that is
                         distributed with this program, or the
                         command that is specified in the
                         configuration file.


         UPDATING MULTIPLE DISK ARCHIVES


         When an archive is created that spans more than a single
         disk, DiskBase will ask you to insert each modified disk.
         It will read the disk and update the databases with
         information about the archives on that disk.  Since
         DiskBase calls an external archive program, it has no way
         of knowing which storage disks the external program has
         changed.  If the archive program can create archives that
         span multiple disks, DiskBase must give you the opportunity
         to update your catalog with information about the modified
         disks.  The following are the options with which you will
         be presented:

                 READ

                         You have another disk that was modified
                         when the archive program created its
                         archive.  Put the next disk in the drive
                         and choose this option until all modified
                         disks have been read.

                 STOP

                         You have no more modified disks that need to
                         be added to the catalog and you're ready to
                         continue on and let the program complete
                         this operation.

                 ABORT

                         Something went wrong - creating the archive
                         failed.
         


         DiskBase                                              Page 11


         PROGRAM CONFIGURATION


         DiskBase can be configured to specify a few global program 
         parameters, and to specify parameters for the external 
         compression program you will use.  The configuration file is 
         an ASCII text file.  If a file called DISKBASE.CFG is 
         located in the default directory when DiskBase is started, 
         the configuration information within it is used.  If a 
         configuration file is not found in the default directory, 
         one found in the directory where the program executable file 
         resides will be used.ÿÿÿ

         The name of the configuration file can be specified by
         setting a DOS environment variable named DSKBSCFG to a
         filename. Like this:

                 SET DSKBSCFG=C:\DISKBASE\MY.CFG

         The configuration file is separated into sections - one of
         which is called GLOBAL and the rest define parameters for
         use with your compression program.  Each section is defined
         by a line of text enclosed in square brackets - like this:

                 [PKZIP Version 1]

         Within each section, parameters are specified by placing
         the desired value to the right of a key term followed by
         an equal sign - like this:

                 ADRIV=A

         The following are the key names, default values, and
         description for the GLOBAL section:

                 ADRIV=A

                         This is the drive where archives are
                         stored.  This can be a diskette drive, or
                         any available DOS drive.  Only the root
                         directory is used to store the archives.

                 DBNAM=DB

                         This is the name of the database used to
                         record information about your archives.
                         This is a five character name and should
                         reflect some logical collection of data -
                         like APPS, DATA, or PICS, ....  This allows
                         you to store many different collections of
                         archives.  This option defaults to DB.
         


         DiskBase                                              Page 12


                         All disks added to your collection will be
                         labeled using the Catalog Name and an
                         ordinal number.  To prevent disks from
                         getting mixed in with the wrong collection,
                         DiskBase will not allow you to add a disk 
                         from a different collection of archives.  
                         i.e. You can't add a disk labeled APPS5 to 
                         your DATA collection.

                 TMPDI=(default directory, or TEMP if defined in
                        the DOS environment)

                         Place used for temporary storage.  This
                         value can be passed to the un/archive
                         program through the %t token - see above.

                         Specify your fastest drive and one that
                         will have plenty of free space.

         The following are the key names, and example values, and
         description of each key name found in a user defined
         archive program section:


                 APROG=PKZIP -APR -b%t -EX %a %s\*.*

                         This is the tokenized DOS command used to
                         create the archive.  The idea is to use the
                         archive program options needed to create
                         the archive so that removing the directory
                         is under DiskBase's control.  Removing the
                         directory will only occur after
                         successfully creating the archive - and
                         only if you chose to move the directory
                         into the archive (by pressing Enter when
                         selecting a directory) rather than copy the
                         directory into an archive (by pressing
                         Ctrl-Enter).

                         If the archive program CAN NOT create 
                         archives across multiple disks then DiskBase 
                         will create the archive in the TMPDI 
                         directory, and then move it to the storage 
                         disk.ÿÿ

                         If the archive command you specify can
                         create an archive that spans more than a
                         single disk, be sure to specify MULTI=Y in
                         this section so that DiskBase can update
                         its catalog from the contents of each
                         disk modified by the archive program.


         DiskBase                                              Page 13


                         ARJ version 2.3 can be used to create
                         multiple disk archives with "ARJ a -r -w%t
                         -va %a %s\*.*".

                         The values for the tokens %a, %s, %t will
                         be swapped for the values of the archive
                         name, source directory, and temporary
                         storage are (if you want to uses one),
                         respectively.

                 UPROG=PKUNZIP -D %a %d

                         This is the tokenized DOS command used to
                         extract files from the archive.  The values
                         for the tokens %a, %d will be swapped for
                         the values of the archive name, and root
                         directory of the destination drive,
                         respectively.

                 VPROG=VIEW %a ZIP

                         DOS command with tokens VIEW.BAT is a batch file
                         in your distribution package used to list
                         the contents of an archive.   %a represents
                         the archive on the archive drive.

                 AFEXT=ZIP

                         The file extension for files created by the
                         archive program.

                 MULTI=N

                         If the archive program CAN create archives
                         that span multiple disks, the program logic
                         is for the archive program to create the
                         archive directly on the storage disks, and
                         then DiskBase will ask you to let it update
                         its catalog by inserting each modified
                         disk.  DiskBase only finds out what changes
                         were made to collection disks by your
                         letting it read each modified disk.


                               SCREEN INDICATORS


         During data entry operation, screen indicators I, N, and C,
         at the top right of your screen, indicate the status of the
         Insert/Overstrike, NumLock, and CapsLock toggles.

         


         DiskBase                                              Page 14


         WHICH ARCHIVE PROGRAM TO USE


         IntelliSys does not endorse any particular program for use
         with its products.  PKZIP, version 2 or higher, by PKWare,
         Inc. (Brown Deer, WI), and ARJ, version 2.3, written by
         Robert K. Jung, both have the capability to perform the
         functions needed by DiskBase - in particular they create
         archives that span multiple disks.  Other archive programs
         may be suitable.  These programs are widely available on
         Bulletin Board Systems and through other sources.  Please
         contact IntelliSys if you need more information on how to
         obtain a copy of these programs if one is not available to
         you.


                                     HINTS


         *       !USE! DOS's ability to help you create distinct
                 logical categories of files by creating separate
                 directories and sub-directories.  Put programs that
                 you may want to archive in separate directories
                 under the root directory.  Put data files in a
                 separate directory under the root.  (If you
                 separate your data from your program files you will
                 find it easier to backup files that have recently
                 changed and are most critical to your work.)

         *       (For Registered Users of DiskBase) use our Menu
                 program to provide access to the programs that are
                 dynamically installed on the Data/Application
                 Drive.  It can re-scan for a current list of the
                 GO.BAT files that exist on that drive.

                 Also, use the GO.CFG file in each directory you
                 wish to archive (described in this document) to
                 associate a description with the directory.  When
                 you see various archives in your catalog that have
                 the same name, the description you gave each
                 archive will help you make sense of them all.

         *       If you understand how to execute the archive
                 program and you understand how the tokens are used
                 under DiskBase's Option menu, use the Temp.
                 Directory entry and Token (%t) to create the
                 archive on the fastest drive you have.  The Temp.
                 drive should be larger than your archive storage
                 drive.
         


         DiskBase                                              Page 15


                                NETWORK ACCESS


         This program was not written to allow access to its files
         by more than one process/user at time.  i.e. It will not
         lock files correctly to allow multiple access if it is
         installed on a shared network drive.


                                  DEFINITIONS


         Archive .... A collection of files that is compressed into
                      a single file.  When compressed, the resulting
                      archive is smaller than the sum of its
                      constituent files.

         Database ... For purposes of this program, a listing of
                      information in tabular form.

         Disk ....... This can be a diskette, another hard drive
                      partition, WORM drive, RAM drive, or any other
                      standard DOS addressable device.


                                 REGISTRATION


         To register your copy of DiskBase, simply print the file
         ORDERFRM.TXT by executing the following DOS command:

                 COPY ORDERFRM.TXT PRN

         and send the completed form with your check or money order
         for $34.95 and $5 shipping and handling to the address
         above.

         Registered users receive:

                 - A copy of the current version of this program.

                 - A copy of and free registration to our hard disk
                   Menu program.  Since your installed programs
                   change dynamically, Menu has the capability to
                   search for batch files called GO.BAT (that you
                   create in each program directory).  These batch
                   files start your program as you would like, and
                   the very presence of the GO.BAT batch file on
                   your Application/Data drive means that it will
                   automatically be added to Menu's Applications
                   Menu.
         


         DiskBase                                              Page 16


                 - 1 year free technical support for the program.

                 - 1 year free updates.


                                 SITE-LICENSES


         Site-licenses are available by contacting IntelliSys at the
         address above.


                             DISTRIBUTING DiskBase


         For information about distributing DiskBase, please refer
         to the file VENDOR.DOC.


                                ACKNOWLEDGMENTS


         Our thanks to all those who have given us suggestions and
         constructive criticism.  And thanks to those in the
         industry who provide tools and share information.  Without
         your efforts this program would not have been possible.
